ScreenTester.io

Gray Banding Test

2%

What you see

None marked
Vertical bandsVertical Horizontal bandsHorizontal BlotchesBlotches TintTint Dark edgesEdges 2%5%10%15%20%50%
  • Next stepIn a dark room, go full screen, step through the levels and mark what you see.

Before you look

4 checks
  • Dark roomLights off
  • Warm upOn for 10 minutes
  • Usual pictureYour brightness
  • Full screenEyes level
  • WhyBanding changes with warm-up, brightness and picture mode, so test the screen the way you use it.

How to test for gray banding

4 steps

A gray banding test is a full gray screen that you judge by eye. Near-black grays show OLED banding best, and mid gray shows the dirty screen effect. A camera exaggerates both.

  1. 1Full screenFStart at 2% and give your eyes 30 seconds.
  2. 2Step up→Go from 5% to 50% and look at the whole screen.
  3. 3Move your headBands in the panel stay put, while reflections move.
  4. 4Mark, recheckMark the cells, then look again the next day.

What gray banding looks like

5 patterns

Five patterns show up on an even gray. Most panels show one or two of them near black. What matters is the level where they start.

PatternOn grayLooks likeMost seen onHow common
Vertical bands Wide columns a shade lighter or darker, top to bottom WOLED, QD-OLED Common
Horizontal bands Lighter or darker rows, often near the top or bottom OLED Less common
Blotches Patches that stay put when the picture pans LCD at mid gray Check at 50%
Tint Areas leaning pink, green or yellow OLED near black Common
Dark edges Edges or corners darker than the middle LCD, large TVs Mild is normal

Why it shows near black

Same offset

Each OLED pixel makes its own light. Near black it gets the least current, so small differences between pixels and lines become a large share of the light.

  • 1Pixel driveTiny differences in current matter most at low light.
  • 2Line driversColumns and rows are driven in groups, and a group that is off by a step shows as a band.
  • 3CompensationThe panel corrects each pixel from stored data, and refresh cycles update it.
  • 4LCD layersAn uneven backlight or diffuser causes blotches and dark edges.

Gray banding or color banding?

Two tests

Both are called banding, but they come from different places and need different tests.

Difference Gray banding Color banding
Shown onOne even grayA smooth gradient
Looks likeBands across an even areaSteps in the gradient
Comes fromThe panelBit depth, compression
With the pictureStays on the panelMoves with it
TestThis pageColor banding test

Frequently asked questions

10 questions

What is gray banding?

Uneven gray from the panel

Gray banding is bands or patches of slightly different brightness on an even gray screen. On OLED it shows mostly as vertical bands at 2–10% gray. It is also called grey banding or near-black uniformity.

Is gray banding normal on OLED?

Some, yes

Most WOLED and QD-OLED panels show some banding at 2–5% in a dark room, and the amount varies from unit to unit. It matters when you see it in your own games and films.

Can gray banding be fixed?

Sometimes reduced

Let the panel run its own refresh cycle, often called pixel refresh or panel care. For a TV, leave it plugged in on standby. Banding can shrink or move, but it seldom goes away.

Does gray banding get worse over time?

It can change

Refresh cycles can reduce or shift it. Over the years, uneven wear adds to it, the same wear that leads to burn-in. Burn-in test →

Will I see gray banding in games and films?

In dark, even scenes

Fog, night skies, smoke and slow pans across dark walls show it most. Bright, busy scenes hide it. Dark menus and loading screens make a quick check.

Should I return a TV or monitor for gray banding?

If you see it in use

If it shows in your own content at your usual settings, contact the seller within the return period. If you only see it at 2% in full screen in the dark, many owners keep the unit.

What is the dirty screen effect?

Blotches that stay put

The dirty screen effect is patches fixed to the screen that show when the picture pans, like looking through a dirty window. Mid gray (50%) shows it best, and it is most common on LCDs.

Why does my phone camera show bands I can't see?

Cameras exaggerate

Phones brighten dark scenes, add contrast and can catch the screen's refresh. Judge by eye, and take photos only to show the seller.

Can a full gray screen cause burn-in?

No

An even gray wears every pixel the same, so it leaves no image behind. In full screen, this page lets the screen sleep after 10 minutes without input.

How do I test a TV for gray banding?

Its browser or a PC

Open this page in the TV's browser, or connect a PC over HDMI and go full screen. Use the picture mode you watch in, since game and movie modes can differ.